Gold pinstriping defines the ZX-14R 30th Anniversary Limited Editions painted areas, and the radial-mount Nissin four-piston calipers are also finished in gold. Mechanically, the 30th Anniversary Edition ZX-14R will be identical to standard model, with the same monstrously powerful 1,441cc four-cylinder engine equipped with traction control and three different riding modes, and the same aluminum monocoque frame with fully adjustable suspension and ABS.
Showing posts with label ninja. Show all posts
Showing posts with label ninja. Show all posts
Saturday, February 21, 2015
The 2015 Kawasaki ZX 14R and 1984 Ninja 900
Introduced in ’84, the first Kawasaki to bear the Ninja name featured a variety of other firsts. At a time when manufacturers were experimenting with engine configurations other than the previously (and now) standard inline four, the 900 was the first motorcycle with a liquid-cooled inline four. According to Kawasaki’s online museum, the company had considered and tested V-four and inline six-cylinder configurations, but settled on a narrow, lightweight inline four – even though at the time Honda’s V-four engines were looking like the future.
Other innovative firsts including moving the camchain to the left end of the cylinder block as opposed to placing it in the center, making the engine narrower and evening up the cylinder spacing to make the ports straighter. The alternator was mounted behind the cylinders to keep the engine narrow, and a gear-driven counterbalancer, six-speed gearbox and hydraulic clutch were all used. And while other manufacturer’s were going bigger and heavier (think Honda Interceptor 1000, Suzuki GS1150, Yamaha FJ1100 and Kawasaki’s own GPz1100), Kawasaki was willing to sacrifice outright power to keep weight down. The Ninja’s engine wouldn’t be too far out of place in today’s world, and many of its features are now the sportbike standard.
The Ninja’s frame was just as innovative. It’s “diamond” design was Kawasaki’s first to use the engine as a stressed member for a large-displacement machine. While the main frame was made from conventional (at the time) round-tube steel, the subframe was a bolt-on piece made from square tubing.
Consider too that while other sportbikes had smallish fairings and separate belly pans for bodywork, the Ninja had a full fairing at the front and a wraparound tailsection that covered the frame and subframe tubing completely. The remainder of the chassis was fairly conventional for the time: A 16-inch front/17-inch rear wheel combination, an air-assisted anti-dive front fork and Uni-Trak rear suspension.
In Motorcyclist magazine’s April ’84 test of the 900 Ninja, the headline reads, “Suddenly, your two-year-old sport bike is ten years old,” an indication of the step forward the bike represented. While the industry was in the midst of a quarter-mile war at the time – with manufacturer’s all hiring Jay “Pee Wee” Gleason to ride the bikes and the results plastered in two-page ads everywhere – the Ninja 900 gave away some displacement and power to the other bikes.
Motorcyclist’s Road Test Editor Jeff Karr posted a 10.96-second run, about two-tenths slower than the then-king Suzuki GS1150. Still, the editors raved about the Kawasaki’s power and handling, with this statement closing the test: “The Ninja is a very exciting motorcycle, a leap forward for large-displacement sporting bikes. If you think the essence of motorcycling is the sensation of leaning into corners, you need one.”
The Ninjas notoriety grew its appearance with Tom Cruise in the movie Top Gun in 1986, the same year in which the next performance Kawasaki was introduced. That bike was dubbed the Ninja 1000R and otherwise known as the ZX-10. While the Ninja 900 wasnt imported into the U.S. after that year, it continued to be produced for other markets until 1996, with various upgrades along the way.

Only 300 units of this special-liveried ZX-14R will be built specifically for the American and Latin American markets according to Kawasaki (an additional 30 units will be built for the Canadian market).
Other innovative firsts including moving the camchain to the left end of the cylinderblock as opposed to placing it in the center, making the engine narrower and evening up the cylinder spacing to make the ports straighter. The alternator was mounted behind the cylinders to keep the engine narrow, and a gear-driven counterbalancer, six-speed gearbox and hydraulic clutch were all used.
And while other manufacturer’s were going bigger and heavier (think Honda Interceptor 1000, Suzuki GS1150, Yamaha FJ1100 and Kawasaki’s own GPz1100), Kawasaki was willing to sacrifice outright power to keep weight down. The Ninja’s engine wouldn’t be too far out of place in today’s world, and many of its features are now the sportbike standard.
Kawasaki is celebrating 30 years of Ninja models in 2015 with special anniversary editions of the ZX-10R, ZX-6R and ZX-14R. Scroll through the gallery above to see more images of the ZX-14R as well as the original Ninja, the 1984 GPz900R, and to learn more about both bikes.
Read more »
Other innovative firsts including moving the camchain to the left end of the cylinder block as opposed to placing it in the center, making the engine narrower and evening up the cylinder spacing to make the ports straighter. The alternator was mounted behind the cylinders to keep the engine narrow, and a gear-driven counterbalancer, six-speed gearbox and hydraulic clutch were all used. And while other manufacturer’s were going bigger and heavier (think Honda Interceptor 1000, Suzuki GS1150, Yamaha FJ1100 and Kawasaki’s own GPz1100), Kawasaki was willing to sacrifice outright power to keep weight down. The Ninja’s engine wouldn’t be too far out of place in today’s world, and many of its features are now the sportbike standard.
The Ninja’s frame was just as innovative. It’s “diamond” design was Kawasaki’s first to use the engine as a stressed member for a large-displacement machine. While the main frame was made from conventional (at the time) round-tube steel, the subframe was a bolt-on piece made from square tubing.
Consider too that while other sportbikes had smallish fairings and separate belly pans for bodywork, the Ninja had a full fairing at the front and a wraparound tailsection that covered the frame and subframe tubing completely. The remainder of the chassis was fairly conventional for the time: A 16-inch front/17-inch rear wheel combination, an air-assisted anti-dive front fork and Uni-Trak rear suspension.
In Motorcyclist magazine’s April ’84 test of the 900 Ninja, the headline reads, “Suddenly, your two-year-old sport bike is ten years old,” an indication of the step forward the bike represented. While the industry was in the midst of a quarter-mile war at the time – with manufacturer’s all hiring Jay “Pee Wee” Gleason to ride the bikes and the results plastered in two-page ads everywhere – the Ninja 900 gave away some displacement and power to the other bikes.
Motorcyclist’s Road Test Editor Jeff Karr posted a 10.96-second run, about two-tenths slower than the then-king Suzuki GS1150. Still, the editors raved about the Kawasaki’s power and handling, with this statement closing the test: “The Ninja is a very exciting motorcycle, a leap forward for large-displacement sporting bikes. If you think the essence of motorcycling is the sensation of leaning into corners, you need one.”
The Ninjas notoriety grew its appearance with Tom Cruise in the movie Top Gun in 1986, the same year in which the next performance Kawasaki was introduced. That bike was dubbed the Ninja 1000R and otherwise known as the ZX-10. While the Ninja 900 wasnt imported into the U.S. after that year, it continued to be produced for other markets until 1996, with various upgrades along the way.

Only 300 units of this special-liveried ZX-14R will be built specifically for the American and Latin American markets according to Kawasaki (an additional 30 units will be built for the Canadian market).
Other innovative firsts including moving the camchain to the left end of the cylinderblock as opposed to placing it in the center, making the engine narrower and evening up the cylinder spacing to make the ports straighter. The alternator was mounted behind the cylinders to keep the engine narrow, and a gear-driven counterbalancer, six-speed gearbox and hydraulic clutch were all used.
Kawasaki is celebrating 30 years of Ninja models in 2015 with special anniversary editions of the ZX-10R, ZX-6R and ZX-14R. Scroll through the gallery above to see more images of the ZX-14R as well as the original Ninja, the 1984 GPz900R, and to learn more about both bikes.
Sunday, February 1, 2015
4 Powerful Tricks To Sketch A Ninja Warrior Face With Pencil
4 Powerful simple tricks to sketch a NINJA WARRIOR face from pencil with shading. How to draw a game face with shading techniques.
| 4 Simple Tricks To Sketch And Shade A Face With Pencil (Pencil Shading Tricks) |
Hi friends, you may have seen many cartoon character, animated movies and games. And you may have exclaimed that how they draw such beautiful character. So today i am going to reveal what is the secret of such shading and art.
And the good thing is even you can learn how to use pencil to draw such face and create a supercomic hero.
Along with we will also use pencil shading techniques so that you may bring some liveliness in the face. So get ready and sit tight because we are going to get some of the best pencil shading technique and art knowledge today.
Yes ! You can also create Animated Movie Character
Today i am going to give you 4 simple tricks , how to shade and sketch a face with pencil , (pencil shading tricks) . In an pencil shading sketch , shading is the most important part which take place in it , a alone shading can change your whole sketch , beware that shading should be correctly done in every type of pencil shading sketches or pencil shading scenery . so let see , how to shade and sketch a face with pencil (pencil shading tricks) .
(pencil shading tricks) so firstly take a plane sheet of paper and draw a face on it :
firstly start making the eyes , then nose , lips then make the face cutt accordingly . then start making the hairs outline wery lightly with the pencil , make the curved lines in he hair according to the 1st image , so that it will be easy to shade it after making the sketch , then make half upper body portion so that sketch will look complete . then the sketch will be ready , you can also make the face sketch according to the image 1st .
| 4 Simple Tricks To Sketch And Shade A Face With Pencil (Pencil Shading Tricks) |
(pencil shading tricks) now second step is to start shading , firstly start shading the dress draw the light shaded lining on the cloths after that shade the eyes , in eyes firstly make the dark circle in middle the near lining shades and also leave a dot shaped gap near the circle of the eye so that eyes will be look shinier then shade the eyebrows darkly and then the turn of the nose make outline of nose darkly and give a light lining shade behind the nose , you can also see the shades of cloths , nose , eyes , in image 2nd and image 3rd , when this shadings will be complete , your sketch will look like same as you can see in 2nd and 3rd image .
| 4 Simple Tricks To Sketch And Shade A Face With Pencil (Pencil Shading Tricks) |
| 4 Simple Tricks To Sketch And Shade A Face With Pencil (Pencil Shading Tricks) |
(pencil shading tricks) now the last step is to shade the hairs , this is the tough step to shade the hairs but i will give you some simple tricks how to make the hairs . so first start shading the lines at hairs place and shade it from up to down direction so that shading will look like hairs then give very dark shade on the upper and down portion on the group oh hairs and let it be white in the middle ,, follow this step for the full hairs then your hairs shade will be ready in a fantastic manner , as you can see the hairs shade in our final 4th image , in 4th image you can see the shading of the hairs and after you do so your face pencil shade sketch will be ready in a fantastic manner .
| 4 Simple Tricks To Sketch And Shade A Face With Pencil (Pencil Shading Tricks) |
So this is ninth special painting of our blog and next time we will come with more special techniquis to make paintings.
fastly we will put some more good paintings and art model and will show how to make them and if you have any problem or confusion related to paintings and drawings , you can comment us on our blog and kindly contact us , sure we will give you the better idea ,, now you can also comment us which type of painting you want on our blog . till then enjoy.
Subscribe to:
Posts (Atom)







